Green Free Standing Stoves

Features:

• Boiler models offer thermostat option
• Riddling system on all non boiler models
• Inner cast iron combustion chamber
• Primary and secondary air regulators
• Full cast iron construction
• Airwash technology
• Large ceramic glass doors
• Top or rear outlet flue
• Ash pan with tool

* Based on standard single radiators and depends on proximity to appliance.
* Performance results for Wood Fuel. 4, 6, 7KW takes a 5" (127mm) Flue Pipe. 8, 10KW takes a 6" (152mm) Flue Pipe
* All measurements in millimetres

Green Insert Stoves

• Improve the efficiency of your open fire from as low as 20% heat efficiency to the room (80% heat loss up chimney) to over 80% heat efficiency
• Good for environment – toxins are burnt in the Green Insert Stove and are not discharged into atmosphere
• Inner cast iron combustion chamber
• Tested under CE test conditions to conform with EN13240
• Reduces heat loss up the flue when unlit
• Refuel less often
• Less Ash/Less cleaning
• Clear view of the flame picture
• Fits into existing standard 16" fireplace opening
• Airwash technology to keep glass clean
• Easy removal for flue cleaning

Fitting:

Easy Installation using our Unique Patented Fixing Mechanism

The Green Insert Stove can be simply installed into a standard solid fuel fireplace opening. Simply remove the fret and grate; slide the appliance into place and tighten the locking system to seal the stove to the fascia of the fireplace back panel. Removing the fireclay fireback is not necessary.

This stove must not be installed into a chimney that serves any other heating appliance.

Remember, remove the Green Insert Stove and clean your chimney every year.

Protect the Environment

Efficiency
Depending on the chimney, open fires can be as low as 20% efficient; the majority of the heat produced goes straight up the chimney and out of the house. Stoves should deliver a minimum 65% efficiency, while some stoves can deliver up to 80% efficiency.

This means that a quality stove will produce more heat, from less fuel, for longer, than an open fire.

Naturally, this means that burning a stove is kinder to the environment also, burning less fuel and delivering fewer toxins into the atmosphere.

Customised lining solutions for gasfires, fireplaces and stoves for temperatures up to 1100°C (2012°F)

Skamolex panel designs is a new concept for lining gasfires, fireplaces and stoves. Skamolex panels include a range of highly insulating refractory panels made of vermiculite containing no ceramic fibres. Skamolex vermiculite panels are ideally suited for lining gasfires, fireplaces and stoves or as heat protection shielding.

Five of our most popular panels are:

• Skamolex vermiculite brick panel 1000mm x 610mm
• Skamolex vermiculite ribbed portrait panel 1000mm x 610mm
• Skamolex vermiculite ribbed landscape panel 1000mm x 610mm
• Skamolex vermiculite cleaved sandstone panel 1000mm x 610mm
• Skamolex vermiculite herringbone panel 1000mm x 610mm

If you would like any further information on Skamolex Panels please click here.